Mining Infrastructure

Rigs, power and cooling — planned as one system

ASIC and GPU mining infrastructure for Bitcoin, Litecoin, Dogecoin, Monero, Ethereum Classic and other proof-of-work coins. The hardware is the easy part — power capacity, cooling and noise are what actually decide whether a setup is viable.

Read the FAQ
Business Challenges

Most mining setups fail on power and heat, not hash rate

Buying rigs is the easy decision. What actually determines whether a deployment is profitable and stable is whether the electrical and cooling plan was sized for reality rather than a spec sheet.

Circuits sized to nameplate power trip under real sustained load.

Air cooling that works for ten rigs falls apart at fifty.

Noise levels rule out otherwise-suitable buildings and locations.

No monitoring means a dead rig or a failed PSU goes unnoticed for days.

Solution Overview

Three things, sized together

Rigs, electrical capacity and cooling are planned as one system rather than three separate purchases — so the setup that gets built is the one that actually keeps running.

ASICs for SHA-256 and Scrypt coins (Bitcoin, Litecoin, Dogecoin), GPU rigs for Monero and Ethereum Classic — sourced, assembled and racked.

Circuit and PDU capacity sized against actual sustained draw, not the manufacturer's nameplate figure — that gap is where breakers trip.

Air-cooled racking with proper hot/cold-aisle separation for smaller setups; immersion cooling where density or noise rules it out otherwise.

BitcoinLitecoinDogecoinMoneroEthereum Classic
Benefits

What sizing it properly actually changes

No tripped breakers

Electrical capacity planned against sustained draw, with headroom — not the manufacturer's best-case number.

Rigs that stay cool

Cooling sized for the room and rig density you actually have, not a generic reference layout.

Failures get noticed

Monitoring flags a dead board or failed PSU the same day, not weeks later in a payout report.

Hardware We Source

ASIC and GPU hardware from established manufacturers

Typical Process

From coin and budget to running rigs

01

Coin & budget

Which coins, what budget, what site — the answers shape every decision after this one.

02

Power & cooling design

Electrical and cooling capacity calculated against sustained draw for the chosen hardware.

03

Sourcing & racking

Rigs ordered, delivered and racked according to the design.

04

Monitoring & handover

Per-rig monitoring configured before handover, so failures get flagged automatically.

FAQ

Common questions

Bitcoin, Litecoin and Dogecoin on ASIC hardware; Monero and Ethereum Classic on GPU rigs — and other proof-of-work coins on request.

We work with a site you already have or are evaluating — power and cooling design depends heavily on the specific building.

Rig density, ambient temperature and noise tolerance of the site — air cooling covers most small-to-mid setups; immersion earns its cost at higher density.

Planning a mining setup?

Tell us the coin, the budget and the site — we'll size the rest properly.